You need to Register for free and Login to post a message in the forum.

Forum

Subject: Sync with module to module (announcement)
Prev Next
You are not authorized to post a reply.

Author Messages
ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

15 May 2008 10:24 PM  

Hi,

I've been trying to make synchronize the announcement module of child portal's and that of parent's.
That means when I change some content on the announcement module in child portal how can I get the same content on parent's site on some module box?

Do I have to change or copy from specific "Default.aspx" file? or ascx file? If so, where can I reach there?

Please help me.

jncraig
Nuke Master II
Nuke Master II
Posts:2030

16 May 2008 9:01 AM  
Do you want to have a single set of announcements that appear in every portal, or do you want to have some installation wide announcements that are also shown along with each portal's announcements?

Joe Craig
DNN Creative Support
Subscribe to the website
ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

16 May 2008 2:55 PM  

I want to show each child portal's announcements on one page of parent portal at the same time.

Thank you in advance. ^_^

jncraig
Nuke Master II
Nuke Master II
Posts:2030

17 May 2008 8:06 PM  
One approach would be to syndicate the announcements from the child site modules and have the parent site subscribe to all of the child site.

I've also seen advertisements for modules that help share modules and data across portals in a single installation. You might want to look at one of those?

Joe Craig
DNN Creative Support
Subscribe to the website
leesykes
Nuke Master II
Nuke Master II
Posts:2993

19 May 2008 7:51 AM  
Just to add, I would also go for the RSS feed method and take the RSS feed from each announcements module to display them in the parent portal. Info on RSS implementation is covered in issue 3

Lee Sykes
Site Administrator
Subscribe to the website : DotNetNuke Video Tutorials : The Skinning Toolkit : DotNetNuke Podcasts
ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

19 May 2008 9:57 PM  

 

Hello Lee,

Thank you for your help.

It's helpful to me but after I linked using RSS http address(child's portal) when I visit again parent portal I couldn't see the contents. However, when I reload the RSS page(after I clicked RSS icon) or subscribe at RSS the page I can see the contents at the parent portal.

Is there any way to sydicate both pages without reloading or subscribing any page?

(I need at least 10 RSS modules on the same parent page to sydicate 10 announcement modules from each child's portals if the only way to sydicate is RSS module)

ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

19 May 2008 10:01 PM  

 

Joe,

Thank you for your reply.

Could you tell me how to set the parent site up to subscribe to all of the child site?

 

jncraig
Nuke Master II
Nuke Master II
Posts:2030

19 May 2008 11:11 PM  
Add an RSS module to the parent site. Configure it to collect from every child site.

In answer to your other question, yes. Each child site will have to syndicate it's announcements. As for synchronizing, that will be done by scheduling the parent site to collect from the child sites. The exact process will depend on which modules you use.

Joe Craig
DNN Creative Support
Subscribe to the website
ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

20 May 2008 1:18 AM  

I did as you mentioned.

Could you tell me if this is normal? When I click the icon of RSS on one module of child portal I have one new page to subscribe to new feed. If I go back to the "News Feed(RSS) module" on parent portal without reloading this page I couldn't get sync. but if I have reloaded and went back to that page I can see the same contents with child portal but If I revisit after log-out and log-in I couldn't any contents on it.

really confusing....

Please help me....

leesykes
Nuke Master II
Nuke Master II
Posts:2993

20 May 2008 3:05 AM  
I'm not sure what is happening there. When you go the the paret portal page it should automatically display the RSS feeds without having to reload the page.

If you are displaying several RSS feeds, I would recommend using Orizonti Nuke Feeds Module

It can display several RSS feeds at once within one instance of the module and has options for storing in cache the RSS feeds so that it only has to update the content for instance once a day.

Lee Sykes
Site Administrator
Subscribe to the website : DotNetNuke Video Tutorials : The Skinning Toolkit : DotNetNuke Podcasts
ryutopia
Nuke Newbie
Nuke Newbie
Posts:6

20 May 2008 10:31 AM  

I think I have some sense....

When I add one external RSS feed site in News Feed Module for testing I can only see the code like attached not right contents like below.
(when I copy and paste here I can see the all contents even but not my site as you can see the attached screen shot.)

FARC commander gives up, calls for dialogue
The commander of the Revolutionary Armed Forces of Colombia's Force 47 has told reporters in Bogota -- a day after surrendering -- that "the solution is not through war. There must be dialogue."



Four people 'executed' in Baja California
Authorities in the Mexican state of Baja California are investigating the deaths of four people, including at least one American, whose bodies were found in a canyon over the weekend, a police spokesman said Monday.





I think you know what it is....^_^
Please let me know how I can fix this and thank you in advance.





leesykes
Nuke Master II
Nuke Master II
Posts:2993

23 May 2008 7:37 AM  
That is covered in this tutorial:
You may also want to look at:



Lee Sykes
Site Administrator
Subscribe to the website : DotNetNuke Video Tutorials : The Skinning Toolkit : DotNetNuke Podcasts
You are not authorized to post a reply.
Forums > DotNetNuke® > Modules > Sync with module to module (announcement)



ActiveForums 3.7

Latest Forum Posts

Best so far for me by mortymoose
This skin is CSS standard compliant.  I understand though that the solpart menu causes it not to val...
RE: centering a page in dnn by mortymoose
No I don't think there is any way to fix that.  It makes sense though because the scroll bar is actu...
RE: Host and Admin user login not working on remote host by paulrobinson
Yes I can register a user and login as that user. It is just the admin and host users which are not...
RE: New CSS site feedback please! by puuri
Everything, including the Flash elements, seemed to work fine during my viewing. I was trying to fi...
RE: MY FIRST DNN SITE by puuri
I just took a look and made it through just fine. I am very new to DNN and working towards generati...
centering a page in dnn by kawal
I have centered my DNN web pages using {text-align: center;} in the Body element.  This works fine, ...
RE: redirecting registered user to a specific page by puuri
I think I found the area that Joe describes by logging in as the Admin user and then from the Admin ...
RE: File Manager Upload (intermittent error) by dnnmq
Per Lee's suggestion, I removed NETWORK SERVICE from the website root then re-added it with Full Con...
RE: Solpartmenu and line breacks by saintX
Hello Lee and thanks for the answer. Obviously the page name can't exceed to more than 50 charcters....
RE: redirecting registered user to a specific page by saintX
Hello and thank you for the answer. May you please kindly explain me more specific where to find the...
RE: App_GlobalResources Runtime Error/Issue With Pre-Compiled Version of 4.08.04 Source Code by jncraig
I think that you'd probably be better served asking question like those over on the DotNetNuke forum...
RE: App_GlobalResources Runtime Error/Issue With Pre-Compiled Version of 4.08.04 Source Code by fletcherdunton
Hi Joe:That makes perfect sense, but I failed to mention that some of the code that I'd added is not...
RE: App_GlobalResources Runtime Error/Issue With Pre-Compiled Version of 4.08.04 Source Code by jncraig
I wouldn't recommend either of those approaches.You don't have to use the source code version of Dot...
App_GlobalResources Runtime Error/Issue With Pre-Compiled Version of 4.08.04 Source Code by fletcherdunton
This thread may be answered somewhere else, so forgive me and point me to the solution.  I'm current...
RE: Database error by derpir
Yeees!!! thank so much Lee!!! I will continue this by looking at video nr 3 on how to transfer fro...
RE: Database error by leesykes
go to programs / microsoft sql server 2005 / configuration tools / SQL server configuration manager....
RE: Database error by derpir
nailed it!!! but how do I restart with the configuration tool? regards //newbie
RE: Database error by derpir
You put me on the right track there. Turns out that I had server authentication set to 'Windows Au...
RE: Issue 22 - Login failed for user xxxx by leesykes
I just checked and it does have it: Right click on the SQL server node - this is the node with th...
RE: Database error by leesykes
I just checked and it does have it:Right click on the SQL server node - this is the node with the gr...
AppTheory
RSS Feeds